Fewer rejects. Better modules. Every module, every time.
MO-System watches your module production line with AI. It finds hidden defects before lamination, when you can still fix them cheaply. Defects such as porous solder joints and air inclusions often slip past EL and flash tests.
Price pressure is high. Hidden defects make it worse.
Module makers are adding capacity fast, and margins are thin. Every module you cannot sell, and every warranty claim, comes straight off your profit.
- ✕Defects are found too late. Faults that are already sealed in after lamination mean scrap, rework and lost output.
- ✕Standard tests miss things. EL, STC flashing and IEC/PID tests do not reliably catch porous solder joints or air inclusions.
- ✕Raw materials vary. Weak components get into the line without anyone noticing and shorten module life in the field.
- ✕Quality data is scattered. Without a single view of it, you cannot find root causes or keep improving.
- ✕Buyers want proof. Wholesalers, EPCs and investors expect quality you can document, especially for export.
Even 1 to 2 warranty cases per 1,000 modules cost real money and damage your reputation. MO-System helps you push that number down.
Quality control along your whole line
Cameras and sensors on your existing line collect data. AI evaluates it in real time and tells your team exactly where to act.
Check incoming material
Cells, ribbons, glass and encapsulants are checked against defined quality criteria before they enter production.
Monitor in-line, before lamination
High-resolution cameras and sensors capture every module at key process steps, including solder joints and layup.
AI analysis and instant feedback
The AI detects anomalies and finds root causes. Your operators can correct the process while the module can still be repaired.
Quality Label and traceability
Every approved module receives the MO-System Quality Label with a unique ID and QR code, so you can prove its quality to buyers and auditors.
Everything you need for consistent module quality
AI-based visual inspection
Automatic detection of solder, layup and cell defects on every module, not just on samples.
Production error identification
Root-cause analysis links defects to machines, process parameters and material batches.
Predictive maintenance
Spot machine wear and process drift early, so you have less unplanned downtime.
Process data and visualization
All production and quality data in one clear dashboard, from shift level to plant level.
Material traceability
Track each module and batch back to the materials used. This makes claims and audits much simpler.
REST API, any line
Works with your existing MES/ERP and with production lines from any line builder worldwide.
Turn quality control from a cost into a sales argument
Higher first-pass yield
Fewer rejects and less rework, so more sellable modules come out of the same line.
Lower cost per module
Less scrap, less wasted material and fewer stops lower your production cost.
Fewer warranty claims
Defects caught in the factory do not fail on a customer's roof. That protects your margin and your brand.
Proven, labeled quality
The MO-System Quality Label and traceable data per module build trust with wholesalers, EPCs, banks and investors.
Ready for export markets
Consistent, documented quality makes it easier to meet the expectations of demanding international buyers.
Faster improvement
Data-driven root-cause analysis shortens the time from finding a problem to fixing it, including when you introduce new materials.
Proof of quality your buyers can scan
Every module that passes all MO-System checks, from incoming material to final inspection, receives the MO-System Quality Label. It is an independent third-party quality label with a unique module ID and a QR code that anyone can verify online.
Independent verification
Every module is assessed by MO-System against objective criteria. The result does not depend on in-house inspection, the line builder or the machine supplier.
Standardized criteria
The same strict benchmarks apply on every line, every shift and in every plant, so quality is comparable.
Full traceability
The unique ID links each module to its full quality history, from the raw material batch to the final test.
Verify by QR code
Wholesalers, EPCs, banks and auditors scan the label and check the module's authenticity and quality status online.
Labeled modules stand out in a crowded market. They support premium pricing and open doors to quality-conscious buyers and export markets.
Beyond end-of-line testing
Conventional quality assurance checks finished modules. MO-System prevents defective modules from being built in the first place.
| Conventional inspection | MO-System | |
|---|---|---|
| When defects are found | After lamination or at final test, when repair is often impossible | In-line, before lamination, when the module can still be fixed |
| Coverage | Samples or end-of-line only | Every module, from incoming material to finished product |
| Hidden solder defects | Often missed by EL and flash tests | Detected by AI-based visual and sensor analysis |
| Root cause | Manual investigation, usually after the fact | Automatic, linked to machine, process and material batch |
| Traceability | Fragmented, paper or spreadsheet | Unique ID and complete quality history for each module |
| Independence | Often in-house only | Independent MO-System Quality Label on every approved module, verifiable by QR code |
From first call to full AI performance
We install MO-System alongside your running production. You do not need to stop the line.
- Step 1 · free
Strategy call
We discuss your line, your products and your current reject and warranty figures.
- Within 7 days
Results forecast
You get a concrete forecast of the results you can expect on your line.
- 2 weeks – 3 months
Installation
Cameras, sensors and software are installed with no production downtime. Your team is trained during this phase.
- approx. 7 months
AI learns your line
The AI is trained on your products and processes. Improvements start to show along the way.
- Ongoing
Continuous improvement
Regular quality reports and data-driven optimization as your production grows.
Swiss precision for India's growing module industry
India is one of the world's fastest-growing solar manufacturing markets. As capacity grows, consistent and documented quality is what sets a manufacturer apart from the competition.
MO-System is developed by infozienz GmbH in Switzerland. Our team brings together AI and big-data software, quality monitoring and solar industry experience.
- Independent of line builders, machine suppliers and module types
- Supports your IEC 61215 / IEC 61730 quality goals with in-process data
- Affordable for growing manufacturers, not only the largest players
- Flexible commercial models: subscription, per inspection or custom
Find out how much MO-System can save on your line
Tell us a little about your production. We will contact you to arrange a free, no-obligation strategy call, by video or in person in India. Prefer to chat? Joachim is available on WhatsApp.
- Free analysis of your optimization potential
- A concrete results forecast within 7 days
- No obligation, no spam
Thank you!
We have received your request and will contact you shortly to schedule your free strategy call.
Frequently asked questions
Do we have to stop production for the installation?
No. MO-System is installed alongside your running line. Depending on the line and scope, installation takes between 2 weeks and 3 months.
Does it work with our existing equipment?
Yes. MO-System works independently of line builders and machine suppliers. Process and production data acquisition is built in, and a REST API connects it to your MES/ERP.
How long until we see results?
Within 7 days of the strategy call you get a forecast for your line. After installation, the AI is trained on your products and processes. It reaches full performance after about 7 months, and improvements appear along the way.
What kind of defects does MO-System detect?
Among others, it finds defects that standard EL, STC flash and IEC/PID tests can miss, such as porous solder joints and solder joints with air inclusions. It finds them before lamination, while the module can still be repaired.
What is the MO-System Quality Label?
It is an independent third-party quality label for every module that passes all MO-System checks, from incoming material to final inspection. Each label carries a unique module ID and a QR code. Buyers, EPCs and auditors scan it to verify the module's authenticity and quality status online.
How is MO-System priced?
We offer flexible models: monthly subscription, per inspection or a custom package for your plant size. The strategy call is free. Afterwards you get a proposal that fits your line.
Is MO-System also affordable for smaller manufacturers?
Yes. MO-System lets growing manufacturers use advanced quality AI without building up their own expensive research and development.